About Product Technical Honor Scene Network Contact Chinese
 
  Sand dredging series
  Sand washing machine series
  Crushing machine series
  Fine Sand Recycling Machine
  Sand making machine series
  Concrete recycling machine
  Iron Mining Equipment
  Dredger series
  Making sand by crushing construction waste
  Company image
  Gold mining boat series
  Sand pumping vessel series
  Car washing machine
  Stone washing machine series
  Sand Sieving Machine
 
Sanlian The Model List of dredging vessels
一、Dredger
Type
category
WS-1
WS-2
WS-3
WS-4
WS-5
TWS-1
(the boat) with attached
TWS-2
(the boat) with attached
floating
long
(m)
A
13m
14m
15m
16m
17m
20m
22m
B
14m
14.5
15.5m
17m
18m
20m
22m
C
15.5m
16m
16.5m
18m
20m
20m
22m
wide
(m)
A
1.5m
1.5m
1.5m
1.5m
1.7m
1.8m
1.8m
B
1.5m
1.5m
1.5m
1.5m
1.7m
1.8m
1.8m
C
1.7m
1.7m
1.7m
1.7m
1.8m
1.8m
1.8m
Form of transportation
(mixing except)
A
Two
transmit
Two
transmit
Two
transmit
Two
transmit
Two
transmit
Two
transmit
Two
transmit
B
Three
trans-mission
Three
trans-
mission
Three
tran-smission
Three
tran-smission
Three
tran-smission
Three
tran-smission
Three
tran-smission
C
Four
tran-smitting
Four
tran-
smitting
Four
tran-smitting
Four
tran-smitting
Four
tran-smitting
Four
tran-smitting
Four
tran-smitting
Conveying arm length
(Clean sand/
small stone /full)
A
12m/6m
13m/6m
14m/8m
15m/10m
18m/12m
12m/6m
12m/6m
B
13m/9/8
13.5m/
9.5m/6m
15m/
11m/6m
16m/
12.5m/8m
18m/
14m/12m
14m/
10m/8m
14m/
10m/6m
C
15m/12m
/8m/6m
15.5m/12.5m
/ 9m/6m
15.5m/12m
/8m/6m
17m/13m/
10m/10m
20m/17m
/14m/15m
15m/
10m/6m
16m/12m
/9m/5m
Gearbox
configuration
A
quantity
2sets
2sets
2sets
3sets
5sets
5sets
5sets
Type
16 06
16 06
16 06
16 06
30 16 06
30 16 06
30 16 06
B
quantity
3sets
3sets
3sets
3sets
5sets
5sets
5sets
Type
32 16 06
32 16 06
32 16 06
32 16 06
30 16 06
30 16 06
30 16 06
C
quantity
3sets
3sets
3sets
3sets
5sets
5sets
5sets
Type
32 16 06
32 16 06
32 16 06
32 16 06
30 16 06
30 16 06
30 16 06
Reducer configuration
(Horizontal reducer)
A
quantity
4sets
4sets
4sets
5sets
9sets
9sets
9sets
Type
500、350、250
500、350、
250
500、350、250
500、350、250
650、350、250
650、350、250
650、350、250
B
quantity
4sets
4sets
4sets
6sets
9sets
9sets
9sets
Type
500、350、250
500、350、
250
500、350、250
650、350、250
650、350、250
650、350、250
650、350、250
C
quantity
5sets
5sets
5sets
6sets
9sets
9sets
9sets
Type
500、350、350
500、350、
350
500、350、350
650、350、250
650、350、250
650、350、250
650、350、250
Hopper (a)
42-46
48-52
52-58
60-66
66-78
60-70
70-76
Under the
digging depth(m)
4m-4.8m
4m-6m
4m-7.5m
4m-10m
4m-12m
8m-12.5m
8m-14m
Dealing with
wool / h
60-100m3
60-80m3
60-80m3
60-80m3
60-80m3
50-70m3
50-70m3
Equipped with
power
1105-1100
1110-1100
1115-1100
1110-1100
1115-1100
2100-1100
2100-1100
Chain plate
Pitch(cm)
60cm
60cm
60cm
60cm
60cm
70cm
70cm
Note: Due to layout constraints, not entirely with us in telephone counseling. The above data for reference purposes only, specific issues should be based on geographical conditions and people that needs the system to do. Change due to product updates without notice.

二、Screen Sand Machine
Type
category
Chassis Size
Transmission rod length
(m)
Processing wool
/小时
Net Stone Type
Equipped with power
Two transmit
6.7m/0.6m/0.35m
8m/m
80-150m3
1/4Stone
1105-1100
Three transmission
8.3m/0.6m/0.35m
12m/7m/8m
80-200m3
2-3cm/3-5cm
1110-1100
Four transmitting
10.5m/0.8m/0.35m
13m/9m/6m/8m
80-150m3
1-2cm/2-4cm/3-6cm
1110-1100
Gravel Screening Machine
10.5m/0.8m/0.35m
10m/7m/6m
80-12m3
1-2cm/3-5cm
Hammer Mill
1115-1110

三、Pumping sand
Type
Captain、wide、Size
Hull Capacity
Depth of gravel extraction
Large
long12mwide3.5m
13m3
13-15m
Small
long15mwide5m
30m3
13-15m
Note: Due to layout constraints, not entirely with us in telephone counseling. The above data for reference purposes only, specific issues should be based on geographical conditions and people that needs the system to do. Change due to product updates without notice.
◆Specifications   
Dredging vessel capable of handling wool 80 cubic meters per hour or so, the net sand sandy good or bad according to 30-80 cubic meters per hour, underwater digging depth: large-scale dredging vessel 13 meters, the general dredgers 4 - 8 meters, with There Changchai 1100,1110, fuel consumption 2.5kg / hour, the staff 2. Including the wages of the workers every day only 100 yuan. This product has a separate screening as a single, double two, sand stones, mud, weeds, etc. and the sand can be separated, through the conveyor belt be sent. Transport part of the divided into two pairs of transmission-type, single-delivery type two kinds. Sand and impurities can be separated on both sides. Transmission distance of 10-20 meters of sand and impurities transport distance of 6-16 meters. The dredging machine broadly divided into the hull, main frame, power, deceleration system, part of the underwater excavation, transport driving part, the operation part. Boat total wide4.5-5 Mi, long10-20 meters, 5 meters high, sand-height of 2-8 meters. Pumping sand: an hour can be extracted from a depth of 13 meters underwater, filter sand 60 cubic meters / hour, the whole cabin is divided into three bodies, two for the floating-body, in the middle for the sand tank. Capacity: large-scale pumping sand to 30 cubic meters of sand is usually pumped 13 cubic meters. Walking speed of 15km / hour, diesel engine driven pulp machine hang. Sieve sand machine: dry sand handling 100 cubic meters of water / hour, sub-transmission type II-VI, and San conveyor type.
Operation Operation and Maintenance  
This machinery after repeated practice and improvement, high degree of automation, easy to learn a good operation, only two people in each class operation, concrete steps are as follows:
1, boot before transmission to the entire machinery and machine oil check, and then starting the engine behind the conveyor belt pull, pull the clutch to launch diesel engine, and slowly moving loose clutch will be transferred to a normal speed. Re-launch before the zipper of the buckets of diesel engines. 2, two diesel engine after starting. Will be transferred to the need for speed speed. Then release the brake arm. Gradually, its down, and so on within the sand hopper more than 2 / 3, to stop decentralization, to wait until 1 / 3 funded by the arm again. When the big arm and the surface of the water when the 45-degree angle (ie, 5 meters or so), shall be parked big arm. At this time the amount of sand inside the hopper to use traction control, move forward to see the amount of sand inside the bucket, depending on progress back to be flexible in case of mechanical sand cave-strenuous work, or pull them in when traction Shengsong open, so that vessels to move backward, move up until the digging. Under the case of large stones such as water or mud layer, the hull will be intense vibration phenomenon, this time should be immediately brought dredging arm, avoid obstacles further.
3, work should pay attention to the following points:
The new machinery or overhauled to be run-in after 24 hours before normal operation.
(1) According to the geographical conditions of backward and forward arm raise, action should be flexible, within the hopper, if large stones, mud, etc. must be clean.
(2) should always check the chain screw, pin, and transmission of various fixed-point fasteners must firmly.
4, stopping inside the hopper so that the sand should be less than 1 / 2, the arm slowly raised, until the exposed surface of underwater corners round. No sand inside the hopper, and then before the engine shut down, and then after the engine stopped. 5, the event of strong winds (5 and above) should be temporarily shut down, so as to avoid failure, repair or replacement of parts should be shut down work in order to avoid human casualties.
6, maintenance and maintenance: Using the period should always check the various parts of the screw and often filling lubricant and maintenance, especially the hopper and screw pin chain, the water wheel and 500 square butt plate reducer Ministries certain fastening bolts intact. Underwater square wheels, with a place should always add the word butter, lubricating oil, flood, or stopped, the ship should be tied to a solid place to prevent the boat away or causing undue damage.
In order to ensure personal safety, we must note the following points:
1, under the age of 18 years and over 50 years of age shall not operate or repair this machine.
2, is strictly prohibited without the professional training or drink and operate machinery in this series.
3, dredging machine repair, they must be all the mechanical headway ran before they are allowed.
 
 
Qingzhou Sanlian Mining Machinery Co., Ltd. 2008-2009 All Rights Reserved.
Address:Qingzhou City in Shandong Province in the eastern suburbs  Phone:+86-536-3839777 Fax:86-536-3878666
 Phone:+86-13562647888 e-mail:dredger@qzsanlian.com